|
|
|
|
|
|
|
|
 |
Vacuum deposition machines and processes for: |
|
|
|
|
|
|
Vacuum machines and processes for: |
|
|
|
|
|
|
Components |
|
|
|
|
|
|
Special equipment |
|
|
|
|
|
|
|
|
Sidrabe, Inc.
Riga, Latvia LV-1073
Tel: +371 67249806
Fax: +371 67139506
E-mail: sidrabe@sidrabe.eu |
|
|
| 3D-Parts/In-line sputtering system |
|
|
Unprecedented production rate is achieved with In-line Sputtering System G600MN by continuous weekly operation (output rate of a jig with coated parts is 15 seconds). The System provides coating of 3D plastic and metal parts for decorative application, enhancing wear resistance, electromagnetic shielding etc. It consists of a number of modules: jigs loading/unloading module, locking chambers, glow discharge chamber, magnetron sputtering chamber and jigs turning chamber.
The uniform high quality coating is provided by the jigs' linear motion, combined with rotation in the glow discharge and magnetron sputtering zones and variable positions of the magnetrons.
The control system provides fully automatic monitoring and control of the jigs transportation and entire technological process. The System is compatible with the flow line of plastic molding and/or lacquering. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Articles loading/ unloading |
Deposition zones with sputter magnetrons |
Article treatment |
|
|
Technical Specifications
Substrate: plastic, metal, alloy articles
Substrate max dimensions: 210 mm high and 145 mm in diameter
Output: 4 jigs/minute
Continuous process period: 120 hours
Coatings: Al, Ti, stainless steel
Sputter equipment: 4 DC magnetrons
Pre-treatment: glow discharge
Pumping: based on oil diffusion pumps
Overall dimensions: 12.8 x 7.5 x 2.6 m |
|
|
|
|
